# PLC and RS-232 Communications

**URL:** <https://forumautomation.com/t/plc-and-rs-232-communications/2053>\
**Category:** Industrial Automation\
**Created:** [June 11, 2017, 11:17pm UTC](https://forumautomation.com/t/plc-and-rs-232-communications/2053 "2017-06-11T23:17:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Chez1](https://forumautomation.com/letter_avatar_proxy/v4/letter/c/58f4c7/32.png) [@Chez1](https://forumautomation.com/u/Chez1)\
**Post date:** [June 11, 2017, 11:17pm UTC](https://forumautomation.com/t/plc-and-rs-232-communications/2053/1 "2017-06-11T23:17:15Z")

</div>

Hello,

I am working on a project to connect a PLC (Micro820 by Allen Bradley) to a simple RS-232 alphanumeric OLED display. I am not too familiar with structured text language, but I have worked with micro-controllers that use similar high-level languages (mostly C-based).

My question is, is it possible to use connected components workbench to program my Micro820 to output ASCII commands to an off-the-shelf RS-232 alphanumeric display? Are there libraries that make life easier to do this?

I welcome any recommendations to related reference material or command tutorials, thanks!

---

<div class="post-metadata">

**Author:** ![Chez1](https://forumautomation.com/letter_avatar_proxy/v4/letter/c/58f4c7/32.png) [@Chez1](https://forumautomation.com/u/Chez1)\
**Post date:** [June 17, 2017, 8:06pm UTC](https://forumautomation.com/t/plc-and-rs-232-communications/2053/2 "2017-06-17T20:06:09Z")

</div>

_Bumped_

Still would appreciate any relevant advice, thanks!
