# Pickup Coil resistance check of mass flow meter

**URL:** <https://forumautomation.com/t/pickup-coil-resistance-check-of-mass-flow-meter/8777>\
**Category:** Field Instrumentation\
**Created:** [November 4, 2020, 7:33am UTC](https://forumautomation.com/t/pickup-coil-resistance-check-of-mass-flow-meter/8777 "2020-11-04T07:33:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [November 4, 2020, 7:33am UTC](https://forumautomation.com/t/pickup-coil-resistance-check-of-mass-flow-meter/8777/1 "2020-11-04T07:33:05Z")

</div>

**How to check mass flow meter pickup coil resistance… (coil cable directly connected on electronic board inside flowmeter, then how to check)**

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [November 4, 2020, 8:43am UTC](https://forumautomation.com/t/pickup-coil-resistance-check-of-mass-flow-meter/8777/2 "2020-11-04T08:43:08Z")

</div>

You need to disassemble the electronic housing and access the core processor. Then only you can check the right pickoff coil, left pick off the coil. the RTD and driving coil.
