# p500 endress hauser strap on flow meter

**URL:** <https://forumautomation.com/t/p500-endress-hauser-strap-on-flow-meter/14172>\
**Category:** Calibration\
**Created:** [June 6, 2026, 5:52am UTC](https://forumautomation.com/t/p500-endress-hauser-strap-on-flow-meter/14172 "2026-06-06T05:52:10Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rvilla](https://forumautomation.com/letter_avatar_proxy/v4/letter/r/ba9def/32.png) [@Rvilla](https://forumautomation.com/u/Rvilla)\
**Post date:** [June 6, 2026, 5:52am UTC](https://forumautomation.com/t/p500-endress-hauser-strap-on-flow-meter/14172/1 "2026-06-06T05:52:10Z")

</div>

Im working on an Endress Hauser strap on ultrasonic flow meter Prosonic 500 .Its set up in a 8 inch cement painted pipe. I get 0 dbs or very low signal, when the pipe is empty and its causing an alarm code f104. It should just be 0 gpm in green. I measure 21.97 ma fault condition.I have it hooked up 2 Traverse with 2 sensors at 3 o clock linear. when the pipe is running i get correct reading and my db jump to 27 db. has anybody seen this? Any help will be greatly appreciated
