# Measuring electrical variables with S7-1200

**URL:** <https://forumautomation.com/t/measuring-electrical-variables-with-s7-1200/2766>\
**Category:** Siemens\
**Tags:** instrumentation, plc, electrical\
**Created:** [December 4, 2017, 3:42pm UTC](https://forumautomation.com/t/measuring-electrical-variables-with-s7-1200/2766 "2017-12-04T15:42:03Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![RickSk](https://forumautomation.com/letter_avatar_proxy/v4/letter/r/258eb7/32.png) [@RickSk](https://forumautomation.com/u/RickSk)\
**Post date:** [December 4, 2017, 3:42pm UTC](https://forumautomation.com/t/measuring-electrical-variables-with-s7-1200/2766/1 "2017-12-04T15:42:03Z")

</div>

Good day,

I plan to implement a project with an S7-1200 where I measure the electrical variables in the utility lines of a residence (voltage, current, frequency, power) and apply certain control actions in response to these variables. The utility is a 240VAC line with a central tap that renders two 120VAC lines with a 180 degrees phase shift.

I’ve never measured this type of variables using a PLC. I therefore write to ask for recommendations of what hardware to use for these measurements. I’ve read about the SIRIUS 3UF7110-1AA01-0 module, would you recommend this one for my application?

Thank you.
