# Loop (Line) Monitoring of Digital Input

**URL:** <https://forumautomation.com/t/loop-line-monitoring-of-digital-input/551>\
**Category:** Field Instrumentation\
**Created:** [November 4, 2015, 9:45am UTC](https://forumautomation.com/t/loop-line-monitoring-of-digital-input/551 "2015-11-04T09:45:18Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nikhil\_More](https://forumautomation.com/letter_avatar_proxy/v4/letter/n/f08c70/32.png) [@Nikhil\_More](https://forumautomation.com/u/Nikhil_More)\
**Post date:** [November 4, 2015, 9:45am UTC](https://forumautomation.com/t/loop-line-monitoring-of-digital-input/551/1 "2015-11-04T09:45:18Z")

</div>

I am using Honeywell Safety System. I am doing loop testing of Digital Input, DI has loop monitoring function.

So how will i can test the loop monitoring function at Factory.

Any suggestion is welcome.

---

<div class="post-metadata">

**Author:** ![Nikhil\_More](https://forumautomation.com/letter_avatar_proxy/v4/letter/n/f08c70/32.png) [@Nikhil\_More](https://forumautomation.com/u/Nikhil_More)\
**Post date:** [November 4, 2015, 9:46am UTC](https://forumautomation.com/t/loop-line-monitoring-of-digital-input/551/2 "2015-11-04T09:46:20Z")

</div>

I have 1 k and 10 k resister with me but i don’t know how to use this.

---

<div class="post-metadata">

**Author:** ![Dgunners](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/278dde/32.png) [@Dgunners](https://forumautomation.com/u/Dgunners)\
**Post date:** [June 29, 2016, 3:08am UTC](https://forumautomation.com/t/loop-line-monitoring-of-digital-input/551/3 "2016-06-29T03:08:48Z")

</div>

Case : your Digital Input in monitoring function. you can check at the safety builder software, if the DI faulty it means your line monitoring bad/problem. use this -------R(1kOhm)--------------------------------------------------I ------------------------------------ I ----------------------------------------- I ------------------------------------ I------------------------------------------ I -------------------------------R(10kOhm) ---------------------- SWITCH(LS/PS,etc) --------------------------------------I---------------------------------------- I --------------------------------------I---------------------------------------- I  
---------------------------------------------------------------------------------I

If the DI module detect 1 kΩ, it means the system in close loop mode ( in safety system usually this is the normal mode) If the DI module detect 10 kΩ, it means the system in open loop mode ( in safety system usually this is the trip mode) but if the DI module detect the resistan more than 10 kΩ or megaOhm or ∞, it means something wrong with the cable or grounding or etc
