# Liquid sensor level.best sensor advice

**URL:** <https://forumautomation.com/t/liquid-sensor-level-best-sensor-advice/1937>\
**Category:** Industrial Automation\
**Created:** [April 24, 2017, 10:31pm UTC](https://forumautomation.com/t/liquid-sensor-level-best-sensor-advice/1937 "2017-04-24T22:31:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dan74uk](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/48db29/32.png) [@dan74uk](https://forumautomation.com/u/dan74uk)\
**Post date:** [April 24, 2017, 10:31pm UTC](https://forumautomation.com/t/liquid-sensor-level-best-sensor-advice/1937/1 "2017-04-24T22:31:47Z")

</div>

what is the best liquid sensor that can read liquid levels from outside a plastic cup.ie can see thru the plastic to the level

or is the better option to have a reader inside the cup

---

<div class="post-metadata">

**Author:** ![carl\_e](https://forumautomation.com/letter_avatar_proxy/v4/letter/c/94ad74/32.png) [@carl\_e](https://forumautomation.com/u/carl_e)\
**Post date:** [April 29, 2017, 1:52am UTC](https://forumautomation.com/t/liquid-sensor-level-best-sensor-advice/1937/2 "2017-04-29T01:52:47Z")

</div>

Point Level Capacitance transmitters, like a Siemens CLS100 or CLS200 can sense liquid level through glass or plastic. Either has a sensitivity adjustment.

I suspect that capactive proximity sensors can do the same at less cost, but they typically have a 'nominal sensing distance". Changing the distance is probably similar to the sensitivity adjustment.

The advantage of sensing outside the vessel is it’s non-contact. The disadvantage is fabbing or customizing mounting for the device.
