# Interview Question : what are the installation and selection considerations of open channel flow measurement?

**URL:** <https://forumautomation.com/t/interview-question-what-are-the-installation-and-selection-considerations-of-open-channel-flow-measurement/425>\
**Category:** Field Instrumentation\
**Created:** [May 19, 2015, 4:06am UTC](https://forumautomation.com/t/interview-question-what-are-the-installation-and-selection-considerations-of-open-channel-flow-measurement/425 "2015-05-19T04:06:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [May 19, 2015, 4:06am UTC](https://forumautomation.com/t/interview-question-what-are-the-installation-and-selection-considerations-of-open-channel-flow-measurement/425/1 "2015-05-19T04:06:40Z")

</div>

Selection and installation considerations of open channel flow measurement

To determine the type of primary device used to for open channel flow measurement following factors must be considered

1.Probable flow range 2.Acceptable head loss 3.Required accuracy 4.Condition of liquid
