# Internal Power fuse blown on conformally coated boards

**URL:** <https://forumautomation.com/t/internal-power-fuse-blown-on-conformally-coated-boards/189>\
**Category:** Honeywell\
**Created:** [December 6, 2014, 5:22pm UTC](https://forumautomation.com/t/internal-power-fuse-blown-on-conformally-coated-boards/189 "2014-12-06T17:22:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [December 6, 2014, 5:22pm UTC](https://forumautomation.com/t/internal-power-fuse-blown-on-conformally-coated-boards/189/1 "2014-12-06T17:22:42Z")

</div>

FSC I/O modules with fault message “Internal power-down”. What will be the reason

---

<div class="post-metadata">

**Author:** ![omega](https://forumautomation.com/letter_avatar_proxy/v4/letter/o/a6a055/32.png) [@omega](https://forumautomation.com/u/omega)\
**Post date:** [December 6, 2014, 5:23pm UTC](https://forumautomation.com/t/internal-power-fuse-blown-on-conformally-coated-boards/189/2 "2014-12-06T17:23:56Z")

</div>

Mostly it is caused by a combination of two factors:

1. The Safety system has degraded performance caused by Electromagnetic Interference (EMI) entering the system via the field wiring and/or power distribution cables.
2. Conformal coating on I/O module affects the functionality of the fuse in the Internal Power circuit.
