# Interface RS-232 scale value to PLC

**URL:** <https://forumautomation.com/t/interface-rs-232-scale-value-to-plc/11483>\
**Category:** PLC (Programmable Logic Controllers)\
**Created:** [September 20, 2023, 9:16am UTC](https://forumautomation.com/t/interface-rs-232-scale-value-to-plc/11483 "2023-09-20T09:16:58Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![zenex](https://forumautomation.com/letter_avatar_proxy/v4/letter/z/ac8455/32.png) [@zenex](https://forumautomation.com/u/zenex)\
**Post date:** [September 20, 2023, 9:16am UTC](https://forumautomation.com/t/interface-rs-232-scale-value-to-plc/11483/1 "2023-09-20T09:16:58Z")

</div>

Good morning all

I would like to interface a weighing scale display value to a PLC in order to control a conveyor belt. The scale has an RS-232 output.

PLC: Delta AS332-T or Delta T70P Weighing Scale: Micro A12E

My first objective is to get the scale value to the PLC for further processing. I have read about using a RS-232 to Ethernet/IP converter, and then plugging the ethernet/IP cable into the PLC. My question is how do I retrieve the value on the PLC? Is this the most common way or are there better methods?

Regards
