# Instrumentation tools for imaging in material analysis

**URL:** <https://forumautomation.com/t/instrumentation-tools-for-imaging-in-material-analysis/5258>\
**Category:** Analytical Instruments\
**Tags:** instrumentation\
**Created:** [November 19, 2018, 7:36pm UTC](https://forumautomation.com/t/instrumentation-tools-for-imaging-in-material-analysis/5258 "2018-11-19T19:36:50Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![divyasree](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/edb3f5/32.png) [@divyasree](https://forumautomation.com/u/divyasree)\
**Post date:** [November 19, 2018, 7:36pm UTC](https://forumautomation.com/t/instrumentation-tools-for-imaging-in-material-analysis/5258/1 "2018-11-19T19:36:50Z")

</div>

# Scanning Probe Microscopy

Solid probe scanning the surface to provide images. The different types are :

1. scanning tunneling microscope (STM)
2. atomic force microscope (AFM)

## Scanning tunneling microscope (STM)

- Binnig and Rohrer were awarded the Nobel Prize in Physics in 1986 (IBM, Zurich) for STM, Ernst Ruska for electron microscopy
- STM uses a tunneling current, a phenomenon of quantum mechanics, to examine material surfaces.
- The tunneling current flows through an atomic-scale gap between a sharp metallic tip and conducting surface atoms.

> Tunneling – a quantum mechanical phenomena where the particle tunnels through thin barrier

 ![image](https://cdn.forumautomation.com/original/2X/4/43fd4ab3d12dd4677c979e4b7dd2a1c64ee5dd09.jpeg)

Tunneling - quantum-mechanical effect where a particle crosses through a classically-forbidden potential energy barrier…flow of electrons result in current.

### Types of connections:

1. sample is biased -ve with respect to the tip, then electrons will flow from the surface to the tip
2. sample is biased +ve with respect to the tip, then electrons will flow from the tip to the surface

 ![image](https://cdn.forumautomation.com/original/2X/5/5a8d0d9f5366a1fe8255999be6c84f0a1195f0be.jpeg)

### Imaging in STM

The image is

- bright - Tip to atom distance low meaning More tunneling current

- dark - Tip to atom distance High meaning Less tunneling current

- STM tip made up of tungsten for conductivity purpose

- Need to operate at vacuum (possible in air, liquids),

- Useful for only conducting samples like metals

 ![image](https://cdn.forumautomation.com/original/2X/9/9ee946a1c942256c11fc1d81a65d00034b8c2d05.jpeg)

Tunneling current is a function of tip position, applied voltage, and the local density of states of the sample

### Modes of STM operation

There are two modes of operation. Imaging of the surface topology may then be carried out in one of two ways:

1. **constant height mode** - in which the tunnelling current is monitored as the tip is scanned parallel to the surface. A plot of the tunnelling current v/s tip position therefore shows a periodic variation which matches that of the surface structure hence it provides a direct "image" of the surface

2. **constant current mode** - in which the tunnelling current is maintained constant as the tip is scanned across the surface. The image is then formed by plotting the tip height (strictly, the voltage applied to the piezo) v/s the lateral tip position. – Preferred to avoid tip damage

## Atomic Force Microscopy (AFM)

 ![image](https://cdn.forumautomation.com/original/2X/a/a1a449d78d381ddedec9504a903072e1d9830e77.jpeg)

AFM detects near-field forces between the tip and sample

 ![image](https://cdn.forumautomation.com/original/2X/1/1e898811d7e0f7f3f32cc4fc7ff29df3732f2688.jpeg)

### Operating principle of AFM

Sample is placed on the scanner. The cantilever with the tip is positioned over the sample using microscopic positioning system. Laser light is incident on the cantilever which reflects and is detected by a photo diode which records the position of the laser beam. Which changes as the position of the cantilever changes.

 ![image](https://cdn.forumautomation.com/original/2X/0/0f51792f137f4d61ef82d07a4eae2f0db748f74d.jpeg)

### Operating modes

1. **Contact mode** The tip is in direct contact with the sample.

2. **Intermittent contact mode** Also known as **tapping mode** , the cantilever is forced to vibrate a little below its resonant frequency and moved towards the surface ….cantilever oscillation amplitude is reduced due to energy loss caused by the tip contacting the surface

 ![image](https://cdn.forumautomation.com/original/2X/3/3701087fb81ce0655adb5407ee33b07727acc87a.jpeg)

1. **Noncontact mode** The cantilever is forced to vibrate a little above its resonant frequency high above the sample surface ![image](https://cdn.forumautomation.com/original/2X/1/1ae81ad2de90180fc7415e67ee3e3d43cf88cb76.jpeg)

### Advantages of AFM

Can also be used in imaging non conductive material

### Disadvantages of AFM

Difficult to access sidewalls, corners -relatively slow

# Confocal Microscopy (Or) Laser scanning Confocal microscopy (LSCM)

An optical imaging technique used to increase the optical resolution and contrast by using a point illumination and a spatial pinhole to eliminate out – of focus light

**Confocal vs optical Microscopy -**

1. laser light source

2. scanning device has better resolution of ~ 200 nm

3. provides three-dimensional (3D) optical resolution

 ![image](https://cdn.forumautomation.com/original/2X/7/7410f5790d618bf6ee2c105e995164db4df41f8a.jpeg)

## Working principle:

1. Laser beam is focused as an intense spot on a certain focal plane of the specimen by a condenser lens, which is also serves as an objective lens to collect the reflected beam.
2. A pinhole aperture is placed at a confocal plane in front of the light detector.
3. The reflected beam from the focal plane in a specimen becomes a focused point at the confocal plane.
4. The pinhole aperture blocks the reflected light from the out-of-focal plane from entering the detector.

**WHY LASER?** Since the pinhole aperture can block a large amount of reflected light, high-intensity laser illumination is necessary to ensure that sufficient signals are received by the detector. The detector is commonly a photomultiplier tube (PMT) that converts light signals to electric signals for image processing in a computer.

> Raster scanning – to acquire the image in 3D.. After finishing one scanning plane, the focal spot is moved in the vertical direction to scan a next parallel plane

* * *

> Recommended Reading

# [Instrumentation tools for magnification in material analysis](https://forumautomation.com/t/instrumentation-tools-for-magnification-in-material-analysis/5248)

# [Instrumentation tools exclusively for thin films](https://forumautomation.com/t/instrumentation-tools-exclusively-for-thin-films/5259)
