# Installation of a DP flow transmitter on a gas and liquid pipeline

**URL:** <https://forumautomation.com/t/installation-of-a-dp-flow-transmitter-on-a-gas-and-liquid-pipeline/76>\
**Category:** Flow Measurement\
**Created:** [October 2, 2014, 6:08pm UTC](https://forumautomation.com/t/installation-of-a-dp-flow-transmitter-on-a-gas-and-liquid-pipeline/76 "2014-10-02T18:08:17Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [October 2, 2014, 6:08pm UTC](https://forumautomation.com/t/installation-of-a-dp-flow-transmitter-on-a-gas-and-liquid-pipeline/76/1 "2014-10-02T18:08:18Z")

</div>

Gas line: the transmitter is installed above the orifice plate to prevent the condensation of gas in the signal line and in the HP & LP chambers.

Liquid line: the transmitter is installed below the orifice plate to prevent the gas trapping in the signal line and in the HP & LP chambers.
