# If valve positioner preferred even on a control valve having a bench valve having a bench set 20-100 kPa

**URL:** <https://forumautomation.com/t/if-valve-positioner-preferred-even-on-a-control-valve-having-a-bench-valve-having-a-bench-set-20-100-kpa/116>\
**Category:** Valves\
**Created:** [October 3, 2014, 1:52pm UTC](https://forumautomation.com/t/if-valve-positioner-preferred-even-on-a-control-valve-having-a-bench-valve-having-a-bench-set-20-100-kpa/116 "2014-10-03T13:52:05Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [October 3, 2014, 1:52pm UTC](https://forumautomation.com/t/if-valve-positioner-preferred-even-on-a-control-valve-having-a-bench-valve-having-a-bench-set-20-100-kpa/116/1 "2014-10-03T13:52:05Z")

</div>

It makes the valve response (movement) quicker. When there is a load change in the process, the positioner assists the valve to achieve the stroke length per the controller’s instruction.