# How volume can be measured?

**URL:** <https://forumautomation.com/t/how-volume-can-be-measured/2852>\
**Category:** Field Instrumentation\
**Tags:** instrumentation\
**Created:** [December 20, 2017, 7:10pm UTC](https://forumautomation.com/t/how-volume-can-be-measured/2852 "2017-12-20T19:10:58Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![sivaranjith](https://forumautomation.com/letter_avatar_proxy/v4/letter/s/ba9def/32.png) [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Post date:** [December 20, 2017, 7:10pm UTC](https://forumautomation.com/t/how-volume-can-be-measured/2852/1 "2017-12-20T19:10:59Z")

</div>

The volume of stored material in the tank can be measured in different ways. Main techniques used to measure the volume is same as the [Level measurement](https://forumautomation.com/c/field-instrumentation/level-measurement) techniques like Ultrasonic, Radar, Using differential pressure transmitter.

Actually, here we are measuring the level of the material in a reservoir, which can be used to calculate the volume of the material.

 ![](https://cdn.forumautomation.com/original/2X/9/99d4ebd546169d200fd05b2319baa309ad6e216f.png)

For this, any of the level measurement technique can be used. Volume measurement is depended on the shape and the size of the tank. If the vessel has a constant cross-sectional area throughout its working height (e.g. a vertical cylinder), then the material height will directly correspond to stored material volume.

Volume measure for different shapes are discussed below:

For vertical section cyclinder:

![](https://cdn.forumautomation.com/original/2X/7/7636d486c7d9c89e5de6035c12dd19918d5d93d8.png)

**V = π r² h**

For horizontal section cylinder:

![](https://cdn.forumautomation.com/original/2X/8/8bd590eb6cda988bd947fe4a4bf1124871c7315e.png)

**V = L [ (h-r) √(2hr - h²) + r² sin−1 ((h-r)/r) + ((π r²)/2)**

For a sphere:

![](https://cdn.forumautomation.com/original/2X/f/f7316bae95930f899f2ca342d6b7263f48a7c290.png)

**V = π h² (r - h/3)**

The volume measurement will be done in the microprocessor attached to the transmitter using the level value, algorithm for this will be already written in the microprocessor.
