# How to use a timer to silence an alarm

**URL:** <https://forumautomation.com/t/how-to-use-a-timer-to-silence-an-alarm/3207>\
**Category:** Industrial Automation\
**Created:** [February 27, 2018, 7:19pm UTC](https://forumautomation.com/t/how-to-use-a-timer-to-silence-an-alarm/3207 "2018-02-27T19:19:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tyfr12203](https://forumautomation.com/letter_avatar_proxy/v4/letter/t/ba8739/32.png) [@Tyfr12203](https://forumautomation.com/u/Tyfr12203)\
**Post date:** [February 27, 2018, 7:19pm UTC](https://forumautomation.com/t/how-to-use-a-timer-to-silence-an-alarm/3207/1 "2018-02-27T19:19:14Z")

</div>

I have a pretty simple application that I’m having trouble with. We have a material hopper with a 2 wire capaticance prox switch that turns off when the hopper is low on material. I have that set up through a relay to send a signal to an alarm when the material is low. Now what I want to do is set it up to where the operator can push a reset button to turn the alarm off for 10 minutes and if the material hasn’t filled back up after that time the alarm goes off again. I want it to repeat the cycle until the hopper is full again. Can I do this with a timer? On delay or off delay? Thanks
