# How to upload Siemens PLC program from PLC to Computer?

**URL:** <https://forumautomation.com/t/how-to-upload-siemens-plc-program-from-plc-to-computer/971>\
**Category:** Siemens\
**Created:** [April 9, 2016, 1:01am UTC](https://forumautomation.com/t/how-to-upload-siemens-plc-program-from-plc-to-computer/971 "2016-04-09T01:01:21Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [April 9, 2016, 1:01am UTC](https://forumautomation.com/t/how-to-upload-siemens-plc-program-from-plc-to-computer/971/1 "2016-04-09T01:01:21Z")

</div>

Uploading from PLC Program and Hardware configuration from PLC to PC procedure - Siemens SIMATIC MANAGAER

Step By Step Procedure

1.Create a new project.

 ![SIMATIC MANAGER Create a new project](https://cdn.forumautomation.com/original/1X/f81785d9f2b170afd5d9265fb704790ad0e8b4eb.jpg)

2.Then Go to following menu

PLC\>Upload station to PG…

 ![Uploading Siemens PLC program to Computer](https://cdn.forumautomation.com/original/1X/a19fc5797c4650e6f2572a09cc1cf1c71463bbd7.jpg)

3.A new window will pop up “Select Node Address”

Click on “View”. Then select the “IP address” of the Siemens PLC you would like to upload it to computer.

 ![Select IP address of PLC - SIMATIC MANAGER](https://cdn.forumautomation.com/original/1X/d02071abd2b0aa4969ca8e778100be447d0c9b33.jpg)

Then click on “OK”

Program is being uploaded to PG.

 ![Uploading program to PG - SIMATIC MANAGER](https://cdn.forumautomation.com/original/1X/9b6ac8b8a476e58d2e930622bc941c522322cd02.jpg)

4.Expand the tree and select the hardware to see hardware configuration .Select “OB1” to see the ladder program.

 ![Select OB1 to see the ladder logic - Siemens PLC](https://cdn.forumautomation.com/original/1X/d6c979fc43e1193f9fede730c30b75e54205d6a2.jpg)
