# How to start and set up new project in Rockwell's Studio 5000

**URL:** <https://forumautomation.com/t/how-to-start-and-set-up-new-project-in-rockwells-studio-5000/2651>\
**Category:** Allen Bradly\
**Tags:** plc\
**Created:** [November 15, 2017, 1:31pm UTC](https://forumautomation.com/t/how-to-start-and-set-up-new-project-in-rockwells-studio-5000/2651 "2017-11-15T13:31:43Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![sivaranjith](https://forumautomation.com/letter_avatar_proxy/v4/letter/s/ba9def/32.png) [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Post date:** [November 15, 2017, 1:31pm UTC](https://forumautomation.com/t/how-to-start-and-set-up-new-project-in-rockwells-studio-5000/2651/1 "2017-11-15T13:31:45Z")

</div>

![](https://cdn.forumautomation.com/original/1X/c7f7ea8099ae71001f3fe383ac1733664d6137a0.png)

Open your Studio 5000 from your desktop. The above-shown studio 5000 window will appear.

Go to **New project** under the create option.

New window brings the controllers option

 ![](https://cdn.forumautomation.com/original/1X/02bf75c5a9fee766ca2a095657d81d7c6ef75939.png)

Select a controller and give an appropriate name for the program you are going to create \> Click **Next**

 ![](https://cdn.forumautomation.com/original/1X/9b10e29f6381b13befef2a74d05cc4be13b55e1a.png)

On the next window appears, select a version of the software for your controller. Choose from **Revision** , eg: 30, 24

Skip the other options and click **Finish**. Now we go into our new project

In your new project, you are allowed to have **Controller organizer** on the left side of the window.

Go to **Main task** in the controller organizer. Every new program will appear in the main task. Right-click on the **main task** \> **ADD** \> **New program** , the window appears as shown below.

 ![](https://cdn.forumautomation.com/original/1X/c4f0a6f7f803f3e25b1b7fc577f656dc3778286a.png)

Name your program on the naming option \> Then select **OK**.

Now go again to the **Main Task** , expand it. You can see your program there, we need to add some logic routine to the program. To add logic routine right click on the program.

Right click \> **ADD** \> **New Routine**

Now give a name to the Routine and you select the type of programming from **Type** , for example; Ladder logic, sequential function chart, structured text etc, select what you have.

Select the Routine type from the **Assignment** , which means select whether the routine is main routine or subroutine. When we start a completely new program it is the Main routine. Whichever program is assigned to the main routine it will always run. Selecting the none will count the routine as a subroutine, program jumps from the main routine to this routine and turn back to the main routine.

Now you may see your routine in the **Main task**. Open your routine, do programming.

 ![](https://cdn.forumautomation.com/original/1X/beee483843fde0fef923c096cd29c34805560ec2.png)

Now will have the programming window add required inputs and output blocks. Don’t forget to assign names to the blocks and create the block by doing **ctrl+W**
