# How to select a Temperature sensor (Thermocouple Vs RTD)

**URL:** <https://forumautomation.com/t/how-to-select-a-temperature-sensor-thermocouple-vs-rtd/695>\
**Category:** Temperature Measurement\
**Created:** [December 29, 2015, 2:30am UTC](https://forumautomation.com/t/how-to-select-a-temperature-sensor-thermocouple-vs-rtd/695 "2015-12-29T02:30:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [December 29, 2015, 2:30am UTC](https://forumautomation.com/t/how-to-select-a-temperature-sensor-thermocouple-vs-rtd/695/1 "2015-12-29T02:30:01Z")

</div>

Thermocouple or RTD which type of sensor is suitable for your application.

Consider the following attributes and decide which sensor is good for your temperature measurement application.

**Thermocouple**

Operating Range (Deg C) - -200 deg C to 2000 deg C Accuracy (Deg C) - 1 Linearity - Medium Thermal response - Fast Noise Problem - High long term stability - Low Cold Junction Compensation - Required Corrosion Issue - High

**RTD**

Operating Range (Deg C) - -250 deg C to 850 deg C Accuracy (Deg C) - 0.03 Linearity - High Thermal response - Slow Noise Problem - Medium long term stability - High Cold Junction Compensation - Not applicable Corrosion Issue - Low

Process requirements will drive the sensor choice.
