# How to measure an interface level by displacer type transmitter?

**URL:** <https://forumautomation.com/t/how-to-measure-an-interface-level-by-displacer-type-transmitter/8859>\
**Category:** Field Instrumentation\
**Created:** [November 25, 2020, 10:11am UTC](https://forumautomation.com/t/how-to-measure-an-interface-level-by-displacer-type-transmitter/8859 "2020-11-25T10:11:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [November 25, 2020, 10:11am UTC](https://forumautomation.com/t/how-to-measure-an-interface-level-by-displacer-type-transmitter/8859/1 "2020-11-25T10:11:11Z")

</div>

Interface level measurement by displacer type transmitter

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [November 25, 2020, 10:27am UTC](https://forumautomation.com/t/how-to-measure-an-interface-level-by-displacer-type-transmitter/8859/2 "2020-11-25T10:27:06Z")

</div>

Yes it is possible, LRV can be calculated at condition when displacer is fully immersed with lighter liquid, and URV when fully immersed with heavier liquid. Can be calibrated by the weight loss that happens when the liquids immerses the displacer of known weight.
