# How to increase the number of Display Builder graphics available in the Display summary in Experion

**URL:** <https://forumautomation.com/t/how-to-increase-the-number-of-display-builder-graphics-available-in-the-display-summary-in-experion/212>\
**Category:** Honeywell\
**Created:** [December 30, 2014, 5:20pm UTC](https://forumautomation.com/t/how-to-increase-the-number-of-display-builder-graphics-available-in-the-display-summary-in-experion/212 "2014-12-30T17:20:27Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [December 30, 2014, 5:20pm UTC](https://forumautomation.com/t/how-to-increase-the-number-of-display-builder-graphics-available-in-the-display-summary-in-experion/212/1 "2014-12-30T17:20:29Z")

</div>

Perform a Backup of both Servers. • Perform a synch (assume ServerA is primary, ServerB is backup) • Break synch, drop ServerB down to “Database Only” • Run “sysbld –preserve –full” on ServerB • When prompted, type Y and Enter to confirm rebuilding the database. • Do you want to rebuild EVERYTHING ? (Y/N) N • Select N to all the initial questions until you see • Do you wish to initialise displays ? (Y/N) Y (The rest of the questions are N) • Then you will see:

- There are XXX displays configured. Enter required number of displays to leave unchanged\> Change to the desired number.
- There are XXX shapes configured. Enter required number of displays to leave unchanged\> ENTER to leave the same number of Shapes. • Restart ServerB to “System Running (Backup)” • DO NOT SYNCH • Perform manual failover (ServerB now primary, ServerA now backup) • Perform a synchronization (ServerB still primary) • Perform manual failover (ServerA now primary, ServerB now backup) • Perform a synchronization (ServerA will be again the primary)
