# How to find the source of earth leakage

**URL:** <https://forumautomation.com/t/how-to-find-the-source-of-earth-leakage/10042>\
**Category:** Electrical\
**Created:** [December 8, 2021, 6:40am UTC](https://forumautomation.com/t/how-to-find-the-source-of-earth-leakage/10042 "2021-12-08T06:40:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [December 8, 2021, 6:40am UTC](https://forumautomation.com/t/how-to-find-the-source-of-earth-leakage/10042/1 "2021-12-08T06:40:37Z")

</div>

Is there any way that we can determine the earth leakage source

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [December 8, 2021, 6:47am UTC](https://forumautomation.com/t/how-to-find-the-source-of-earth-leakage/10042/2 "2021-12-08T06:47:46Z")

</div>

In case if there is any CB tripping, First Remove the output from the circuit breaker, test the circuit breaker on its own without load, sometimes the breaker might have a problem, then proceed by removing all the appliances on the sockets outlet, then plug one by one, the appliance that has got a problem will trip off the breaker. You can also use an earth leakage current clamp meter to determine the fault
