# How to do Upload and Online edit in RSLogix 5000

**URL:** <https://forumautomation.com/t/how-to-do-upload-and-online-edit-in-rslogix-5000/4958>\
**Category:** Allen Bradly\
**Created:** [October 19, 2018, 4:40pm UTC](https://forumautomation.com/t/how-to-do-upload-and-online-edit-in-rslogix-5000/4958 "2018-10-19T16:40:29Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![sivaranjith](https://forumautomation.com/letter_avatar_proxy/v4/letter/s/ba9def/32.png) [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Post date:** [October 19, 2018, 4:40pm UTC](https://forumautomation.com/t/how-to-do-upload-and-online-edit-in-rslogix-5000/4958/1 "2018-10-19T16:40:30Z")

</div>

> # Upload program from a PLC

 ![RSLogix5000-Splash-Compact-Control-Featured-Image-1](https://cdn.forumautomation.com/original/2X/1/17a2f7dc70d7d47774bfe82267f935b43e214158.jpg)

A program can be uploaded from a [PLC](https://forumautomation.com/c/plc-programmable-logic-controllers) that is currently connected to an open project. Use the following procedure to transfer the program from the PLC.

 ![image](https://cdn.forumautomation.com/original/2X/5/54943113ee3a11ede2f6ebb01e8a005df6731b1e.jpg)

- Select the PLC object in the project work area.

- Select the Work Online button from the toolbar. Communication \> Who active \> Select a controller \> Click on Upload.

- New “connected to upload” tab will appear.

- Click on select file. Select the file you have to upload from your system

A confirmation message is displayed, select Yes to connect to the PLC. After a movement, you’ll see the controller’s program uploading.

 ![image](https://cdn.forumautomation.com/original/2X/2/2b1287343ba0b2b9025364d9f32b6c8bf26f5f15.jpg)

Once done, you should find you have uploaded the program and are online with the Controller. At this point, always perform another “File – Save”.

## Online Edit

Once the program has been created and the project and PLC settings are adequate, the PLC can be connected to allow on-line operations to be carried out. Online editing is not possible in Run mode.

Use the following procedure to edit online. Select the PLC object in the project work area.

- Select the Work On-line button from the toolbar. A confirmation message is displayed, select Yes to connect to the PLC.

- Select the On-line Edit Rungs button from the toolbar.

- The color of the background image will be edited to change indicating that the area can now be edited.

After normal edit is complete, select the Send On-line Edit Changes button from the toolbar. If the change is successful, the area edited on the ladder program returns to read-only. To cancel an online edit, select Cancel On-line Edit Changes from the toolbar.
