# How to do Allen Bradley MicroLogix 1100 Hardware Configuration with an Analog output

**URL:** <https://forumautomation.com/t/how-to-do-allen-bradley-micrologix-1100-hardware-configuration-with-an-analog-output/9024>\
**Category:** Allen Bradly\
**Tags:** plc\
**Created:** [December 29, 2020, 5:15am UTC](https://forumautomation.com/t/how-to-do-allen-bradley-micrologix-1100-hardware-configuration-with-an-analog-output/9024 "2020-12-29T05:15:56Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ajmal\_ismail](https://forumautomation.com/letter_avatar_proxy/v4/letter/a/e9a140/32.png) [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Post date:** [December 29, 2020, 5:15am UTC](https://forumautomation.com/t/how-to-do-allen-bradley-micrologix-1100-hardware-configuration-with-an-analog-output/9024/1 "2020-12-29T05:15:56Z")

</div>

**MicroLogix PLC**

This form of PLC is primarily used in small-scale industries. In this sort of PLC, we used rslogix500 for programming purposes. The input and output cards can be paired using a ribbon cord. We don’t need a physical rack to connect I/O units.

It supports the RS232/485 networking port and has an Ethernet port. It also has an LCD monitor.

The primarily used PLCs of MicroLogix are

**How to do Hardware Configuration in MicroLogix PLC?**

**Step 1)** Open RSLinx Software and click configuration drivers

 ![image](https://cdn.forumautomation.com/original/2X/8/886d586577d98139e57bf4a48afa08b9e8009da9.jpeg)

**Step 2)** Drop down the tab and select RS232 DFI devices and Click on “Add New” and Press “OK”

![image](https://cdn.forumautomation.com/original/2X/8/8cead01c8754b2e7316fb4e3f727b0236608ba32.jpeg)

**Step 3)** Select the Com port and click “Add Configure” and press “OK”.

![image](https://cdn.forumautomation.com/original/2X/9/9230197ea5e66eb85ae8aa8197939f048f704dd2.png)

**Step 4)** Select the Ethernet IP from the main menu and click “Add New”.

![image](https://cdn.forumautomation.com/original/2X/4/41c03e2a7c9cc9ac885efaa27e12d5bd35d34056.jpeg)

**Step 5)** Click Ok and select the IP address

 ![image](https://cdn.forumautomation.com/original/2X/a/a169b318d98e377ca74d069663c051d4e8be25be.jpeg)

**Step 6)** Open RSLogix Software and open a new file

 ![image](https://cdn.forumautomation.com/original/2X/a/a1e36220a9147894a2d322c41e42c8f1bfb73c7e.jpeg)

**Step 7)** Scroll down the tab and select the MicroLogix model

 ![image](https://cdn.forumautomation.com/original/2X/6/6d7809cf986b141422a91ecfe82ee8e59402b6a6.jpeg)

Note: here I am using MicroLogix 1100 Model. Select the MicroLogix model which one you have.

**Step 8)** Select the IO configuration and click Read IO Config

 ![image](https://cdn.forumautomation.com/original/2X/e/e552687a28ef62b2eda68b9b016c3eed34a9f0dc.jpeg)

 ![image](https://cdn.forumautomation.com/original/2X/5/5ee18534fe0a4d78410bc3d432ab40110f4028b9.jpeg)

Then press OK and it automatically configures the IO devices we connected to the MicroLogix PLC

**How to do Channel Configuration?**

**Step 1)** Open RSLinx Software and Click on Channel Configuration

 ![image](https://cdn.forumautomation.com/original/2X/8/835cf049efbc6d027f167243b28569a6a0e30663.jpeg)

**Step 2)** Select channel 1 and take off the tick **(✓)** signal from Boot enable.

 ![image](https://cdn.forumautomation.com/original/2X/6/678bd7c4811749a9edfda35a1fcce16c1385547e.jpeg)

**Step 3)** Set the IP Address.

![image](https://cdn.forumautomation.com/original/2X/8/8e9d3f96165cf4c1fe99f4b1a9198972eea471cb.jpeg)

 ![image](https://cdn.forumautomation.com/original/2X/a/af1ee6f1dfc9450fba5c370f9a306f60d09ce825.jpeg)

Note: If you don’t know the IP address, open RSLinx and Configure types and Double Click on the Ethernetp-1 and click “Configure”. See the pictures below.

**Step 4)** Open RSLogix and click the OFFLINE and Select download and Press YES after that.

 ![image](https://cdn.forumautomation.com/original/2X/b/b0b29e7e7db64bbc47b63d2b5577b8637f35e208.jpeg)

**Step 5)** Now your system becomes Online.
