# How to Connect and Download a Program in Siemens S7-200 PLC?

**URL:** <https://forumautomation.com/t/how-to-connect-and-download-a-program-in-siemens-s7-200-plc/8984>\
**Category:** Siemens\
**Created:** [December 19, 2020, 11:35am UTC](https://forumautomation.com/t/how-to-connect-and-download-a-program-in-siemens-s7-200-plc/8984 "2020-12-19T11:35:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ajmal\_ismail](https://forumautomation.com/letter_avatar_proxy/v4/letter/a/e9a140/32.png) [@Ajmal\_ismail](https://forumautomation.com/u/Ajmal_ismail)\
**Post date:** [December 19, 2020, 11:35am UTC](https://forumautomation.com/t/how-to-connect-and-download-a-program-in-siemens-s7-200-plc/8984/1 "2020-12-19T11:35:04Z")

</div>

**What is Siemens S7-200 PLC?**

The S7-200 series of micro-programmable logic controllers (Micro PLCs) can control a broad variety of applications. Variety of products that serve the automation needs. It’s a Compact - modular type PLC. It is also used for small scale industry like Logo PLC

It has 38 Analog I/O capacity and 256 Digital I/O capacity

Micro win is the software used for programming.

RS485 communication port is available.

**Step 7**  **Microwin** is the software used for programming purpose

**Hardware configuration of S7-200**

The S7-200 CPU integrates a microprocessor, an integrated power supply, and an input circuit.

Output circuits in a compact housing to deliver an efficient Micro PLC.

There are also different S7-200 CPU available with different features and capabilities that help to meet your various applications. Check the table below

 ![image](https://cdn.forumautomation.com/original/2X/4/47d5948a83fea27dc35e4c0f1ca82e3e858c14cb.png)

In order to help satisfy the product specifications, the S7-200 family provides a wide range of Extension modules. You may use these extension kits to add extra features.

 ![image](https://cdn.forumautomation.com/original/2X/9/94116a5aa197465e71a5f3d85a873c55153e65a1.png)

**How to Communicate S7- 200 with Computer?**

Siemens provides two programming options for connecting your computer to your S7-200: a direct connection with a PPI Multi-Master cable, or a Communications Processor (CP) card with an MPI cable.

The PPI Multi-Master programming cable is the most common and inexpensive way to link your computer to the S7-200. This cable links the contact port of the S7-200 to the serial communication of your device. The PPI Multi-Master programming cable can also be used to connect other communication devices to the S7-200.

**How to Download Program on PLC?**

**Step 1)** Install Micro/Win software on Computer

**Step 2)** Open Micro/Win software and Click the RUN icon on the toolbar or choose the PLC\*\*-\>\*\* RUN menu command

**Step 3)** Click OK to change the operating mode of the S7-200 PLC.

Note: When the S7-200 is in RUN mode, the output LED is in RUN mode, the output LED for Q0.0 is turned on and off when the S7-200 is running the program.

**Step 4)** Click on PG/PC Interface

 ![image](https://cdn.forumautomation.com/original/2X/9/9a109dd8e6229e000c0bf6eee64a87a7f6a14d61.png)

**Step 5)** Click on PC/PPI and local connection and choose **COM4**

 ![image](https://cdn.forumautomation.com/original/2X/6/6977aa8fa9004a519710a7a3b1658bd57b211219.png)

**Step 6)** Click on the communication tab.

 ![image](https://cdn.forumautomation.com/original/2X/8/8b0ca5cb7111b7a23eb839c3cfd48a448d0682de.jpeg)

**Step 7)** In the Access Path, select PC/PPI cable (PPI). a) Click the Properties button.

 ![image](https://cdn.forumautomation.com/original/2X/b/bb19f617be3d190a817300c6211bc2545364456c.jpeg)

**Step 8)** a)Assign the station address (#0 is assigned for this test) b) Set the transmission rate at 9.6kbps c) Highest node address is 31 d) Click the OK button to exit from the Properties dialogue box

 ![image](https://cdn.forumautomation.com/original/2X/b/b3412e0d2d835d1d867e2824434a8a115685073f.jpeg)

**Step 9)** Now, create a simple logic by clicking on the normally open contact/output coil

**Step 10)** Select Download option

 ![image](https://cdn.forumautomation.com/original/2X/8/818ab01b8ab08c3ef55b23542ebd4819d65be458.png)

Note: Follow all settings in the Download dialog box

 ![image](https://cdn.forumautomation.com/original/2X/7/7d3a3c36e39592c89397658c68f3fcdb62c77aae.png) ![image](https://cdn.forumautomation.com/original/2X/b/b74d507c1d7f6b8892539fd9a08a7f998d30e5c4.png) ![image](https://cdn.forumautomation.com/original/2X/7/74d4541adb1fb4a5cf2a05850c953a040303ac74.png)
