# How to connect 2 wire transmitter to 4 wire channel in DCS?

**URL:** <https://forumautomation.com/t/how-to-connect-2-wire-transmitter-to-4-wire-channel-in-dcs/9197>\
**Category:** Field Instrumentation\
**Tags:** dcs\
**Created:** [February 25, 2021, 10:22am UTC](https://forumautomation.com/t/how-to-connect-2-wire-transmitter-to-4-wire-channel-in-dcs/9197 "2021-02-25T10:22:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [February 25, 2021, 10:22am UTC](https://forumautomation.com/t/how-to-connect-2-wire-transmitter-to-4-wire-channel-in-dcs/9197/1 "2021-02-25T10:22:45Z")

</div>

Explain the connection of the 2 wire transmitter to the 4 wire channel in DCS? I want it through signal isolator

 ![image](https://cdn.forumautomation.com/original/2X/7/707a5ffb9ace64fae5fa4e00ffd41558b91f9a1c.jpeg)

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [February 25, 2021, 10:28am UTC](https://forumautomation.com/t/how-to-connect-2-wire-transmitter-to-4-wire-channel-in-dcs/9197/2 "2021-02-25T10:28:00Z")

</div>

7 and 8 for output current or voltage

3

4&5 for isolator power

1&2 for input signal

You need to set dip switch inside the housing , to set input mode in form of current or voltage
