# How to change the range of a foundation fieldbus instrument in Honeywell Experion PKS

**URL:** <https://forumautomation.com/t/how-to-change-the-range-of-a-foundation-fieldbus-instrument-in-honeywell-experion-pks/145>\
**Category:** Honeywell\
**Created:** [October 22, 2014, 5:33pm UTC](https://forumautomation.com/t/how-to-change-the-range-of-a-foundation-fieldbus-instrument-in-honeywell-experion-pks/145 "2014-10-22T17:33:22Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [October 22, 2014, 5:33pm UTC](https://forumautomation.com/t/how-to-change-the-range-of-a-foundation-fieldbus-instrument-in-honeywell-experion-pks/145/1 "2014-10-22T17:33:23Z")

</div>

1.Double click on the device (Control builder) 2.Take the device to out of service. 3.Change the range 4.Take the instrument into service
