# How to change the parameters of power-flex VFD 525

**URL:** <https://forumautomation.com/t/how-to-change-the-parameters-of-power-flex-vfd-525/9133>\
**Category:** Field Instrumentation\
**Created:** [February 5, 2021, 11:51am UTC](https://forumautomation.com/t/how-to-change-the-parameters-of-power-flex-vfd-525/9133 "2021-02-05T11:51:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumentationtechi](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/50afbb/32.png) [@instrumentationtechi](https://forumautomation.com/u/instrumentationtechi)\
**Post date:** [February 5, 2021, 11:51am UTC](https://forumautomation.com/t/how-to-change-the-parameters-of-power-flex-vfd-525/9133/1 "2021-02-05T11:51:24Z")

</div>

**I want to change the paramters of Powerflex 525 VFD so that the drive’s faceplate only respond to start, stop and direction button.**

---

<div class="post-metadata">

**Author:** ![ashlin](https://forumautomation.com/user_avatar/forumautomation.com/ashlin/32/3775_2.png) [@ashlin](https://forumautomation.com/u/ashlin)\
**Post date:** [February 5, 2021, 12:02pm UTC](https://forumautomation.com/t/how-to-change-the-parameters-of-power-flex-vfd-525/9133/2 "2021-02-05T12:02:35Z")

</div>

Scroll to P 046 = Start Source

by default, it is set on 1 which is the keypad, if not select 1

This is correct to use the start/stop buttons on the front

1 = keypad ( Start / Stop buttons ) 2 = Term block

Scroll to P 047 Speed reference

by default, it is set on 1 which is drive pot on the front of the VFD

1 = Drive Pot 2 = Keypad frequency 5 = 0-10v input 6 = 4 – 20 ma
