# How to change set-point using HART communicator? Different types of HART communicator connections

**URL:** <https://forumautomation.com/t/how-to-change-set-point-using-hart-communicator-different-types-of-hart-communicator-connections/2519>\
**Category:** Industrial Networking\
**Tags:** instrumentation\
**Created:** [October 26, 2017, 7:28pm UTC](https://forumautomation.com/t/how-to-change-set-point-using-hart-communicator-different-types-of-hart-communicator-connections/2519 "2017-10-26T19:28:38Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![sivaranjith](https://forumautomation.com/letter_avatar_proxy/v4/letter/s/ba9def/32.png) [@sivaranjith](https://forumautomation.com/u/sivaranjith)\
**Post date:** [October 26, 2017, 7:28pm UTC](https://forumautomation.com/t/how-to-change-set-point-using-hart-communicator-different-types-of-hart-communicator-connections/2519/1 "2017-10-26T19:28:40Z")

</div>

A HART communicator is a secondary master in HART communication. HART communicator devices can be connected in different ways to a transmission line.

> **HART communicator to HART loop:**

 ![](https://cdn.forumautomation.com/original/1X/4983617530f4c1d85672e768590468c949c6e573.png)

> **Connecting directly to a HART device:**

 ![](https://cdn.forumautomation.com/original/1X/5708d779de9d373532da732cc9687875c053e944.png)

> **Connect with optional 250-ohm resistor:**

This is an optional connection, for a safety 250 ohm is connected if there is resistor below 250ohm in the loop.

 ![](https://cdn.forumautomation.com/original/1X/c8b7bd32752afdde8bb5bde50eb6062144819ad3.png)

> ## How to view and change the setpoint?:

- Connect the Communicator to the loop, then switch ON the device.

- Double tap on the **HART Application** , Now you will get an Online main menu on the display.

- ![](https://cdn.forumautomation.com/original/1X/c527702cff21ea7a78fc4936cade8ecb588a8fcb.png)

- This online window includes important information on the devices connected. Process variable Analog output Lower range value Upper range value

- Select the parameter and change them if you want. Once you have made changes to the parameters, you may send them to the device.

- An asterisk will appear next to the parameter name of any un-sent item.
