# How is Transfer function G(s) derived?

**URL:** <https://forumautomation.com/t/how-is-transfer-function-g-s-derived/4648>\
**Category:** Field Instrumentation\
**Tags:** instrumentation\
**Created:** [September 14, 2018, 6:19pm UTC](https://forumautomation.com/t/how-is-transfer-function-g-s-derived/4648 "2018-09-14T18:19:20Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rajeena](https://forumautomation.com/letter_avatar_proxy/v4/letter/r/4af34b/32.png) [@rajeena](https://forumautomation.com/u/rajeena)\
**Post date:** [September 14, 2018, 6:19pm UTC](https://forumautomation.com/t/how-is-transfer-function-g-s-derived/4648/1 "2018-09-14T18:19:21Z")

</div>

# How is Transfer function G(s) derived?

The transfer function is commonly used in the analysis of single-input single-output electronic filters, for instance. It is mainly used in signal processing, communication theory, and control theory.

The term is often used exclusively to refer to linear, time-invariant systems (LTI). Most real systems have non-linear input/output characteristics, but many systems, when operated within nominal parameters (not ‘over-driven’) have behaviour that is close enough to linear that LTI system theory is an acceptable representation of the input/output behaviour.

## Transfer function of a closed-loop system

 ![image](https://cdn.forumautomation.com/original/2X/b/b6ab2b01366646eed7413ea2147c61f21fc4f2f3.png)Diagram of a closed-loop system. Mason’s rule can be applied to determine the closed-loop transfer function.

We can deduce for the output of the system: Y (s) = G(s)U(s) = G(s)Hc(s)E(s)

```
     = G(s)Hc(s)[R(s) − M(s)Y (s)

     = L(s)R(s) − L(s)M(s)Y (s)

```

With L(s) the transfer function of the open-loop system (controller and plant)

(1 + L(s)M(s))Y (s) = L(s)R(s)

Y (s) = (I + L(s)M(s))−1L(s)R(s) = T(S)R(s),

Therefore T(S)=Y(S)/R(S)

where T(s) is called the reference transfer function.
