# How is Ex ma, Ex mb and Ex mc differs in the protection?

**URL:** <https://forumautomation.com/t/how-is-ex-ma-ex-mb-and-ex-mc-differs-in-the-protection/1288>\
**Category:** Field Instrumentation\
**Created:** [August 28, 2016, 6:42am UTC](https://forumautomation.com/t/how-is-ex-ma-ex-mb-and-ex-mc-differs-in-the-protection/1288 "2016-08-28T06:42:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![automate](https://forumautomation.com/letter_avatar_proxy/v4/letter/a/51bf81/32.png) [@automate](https://forumautomation.com/u/automate)\
**Post date:** [August 28, 2016, 6:42am UTC](https://forumautomation.com/t/how-is-ex-ma-ex-mb-and-ex-mc-differs-in-the-protection/1288/1 "2016-08-28T06:42:20Z")

</div>

Ex m denotes encapsulation type protection for using components in hazardous area. Equipment with ma is used in Zone 0, mb in Zone 1 and mc in Zone 2. But what is the difference between these three?

---

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [August 28, 2016, 6:43am UTC](https://forumautomation.com/t/how-is-ex-ma-ex-mb-and-ex-mc-differs-in-the-protection/1288/2 "2016-08-28T06:43:40Z")

</div>

EXm as you are aware refers to the protection concept of encapsulation, The suffixes a / b / c refer to EPL (Equipment Protection Level) which apply to Ex d Ex g and Ex m

a = “Very High” Protection - safe after two consecutive malfunctions b = “High” Protection - safe after one malfunction c = “Normal” Protection - safe under normal operating conditions

Note Level c is for surface industries only and only Ex ma and Ex mb are permitted in mines
