# How does HART( Highway Addressable Remote Transducer) works?

**URL:** <https://forumautomation.com/t/how-does-hart-highway-addressable-remote-transducer-works/218>\
**Category:** Field Instrumentation\
**Created:** [December 31, 2014, 6:05pm UTC](https://forumautomation.com/t/how-does-hart-highway-addressable-remote-transducer-works/218 "2014-12-31T18:05:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [December 31, 2014, 6:05pm UTC](https://forumautomation.com/t/how-does-hart-highway-addressable-remote-transducer-works/218/1 "2014-12-31T18:05:01Z")

</div>

The HART Protocol provides two simultaneous communication channels on the same wire: 4-20mA “current loop” analog and a HART digital signal. While the analog signal continues to provide primary values to and from field instruments, the digital signal provides additional device information. This is a very robust method with roots in the Bell 202 Frequency Shift Keying (FSK) standard, which originally superimposed a digital communication signal “on top of” the 4-20mA current loop to bring Caller ID technology to the field of telephony
