# How Does a Motor Control Circuit work using Direct-On-Line (DOL) Starter in Real Industrial Applications?

**URL:** <https://forumautomation.com/t/how-does-a-motor-control-circuit-work-using-direct-on-line-dol-starter-in-real-industrial-applications/13245>\
**Category:** Electrical\
**Tags:** motor-control\
**Created:** [May 16, 2025, 7:45am UTC](https://forumautomation.com/t/how-does-a-motor-control-circuit-work-using-direct-on-line-dol-starter-in-real-industrial-applications/13245 "2025-05-16T07:45:53Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [May 16, 2025, 7:45am UTC](https://forumautomation.com/t/how-does-a-motor-control-circuit-work-using-direct-on-line-dol-starter-in-real-industrial-applications/13245/1 "2025-05-16T07:45:53Z")

</div>

The following illustration shows a functional motor control circuit that includes both power and control parts.

It is a traditional Direct-On-Line (DOL) starting configuration that is often used in industrial environments. Appropriate for students, field technicians, & automation engineers.

 ![image](https://cdn.forumautomation.com/original/2X/8/8dd484cb55475a95b300ef3f8973c2ddf38b2723.jpeg)

## Power Section (Left side - 440V 3 Phase AC)

- **Q1 - Motor Circuit Breaker:** Protects motor and wires from overcurrent and short circuits.

- **K1 - Electrical Contactor:** Switches three-phase electricity to motor. Controlled by a circuit.

- **Cables & Terminals:** Heavy-duty industrial cables & terminal blocks provide safe, heat-resistant wiring.

- **M1 - 3-Phase Motor:** The main load is usually an induction motor for fans, pumps, or conveyors.

[color=#1e00a3] **Power Flow Path:** [/color] **[color=#CF2E2E] L1, L2, L3 → Q1 → K1 → Motor Terminals (U1, V1, W1).[/color]**

## Control Section (Right Side: 220V AC Converted to 24V DC)

- **Q2 - Control Circuit Breaker:** Protects low-voltage (LV) control side from faults.

- **Power Supply (AC/DC Converter):** The power supply (AC/DC Converter) converts 220V AC to 24V DC for safe powering the control circuit.

- **F1 - Control Fuse:** Provides additional protection against the overcurrent in control wire.

- **S1 - Emergency Stop (NC):** A normally closed pushbutton that immediately stops the circuit when pressed.

- **S2 – STOP Button (NC):** When pressed, the S2 - STOP Button (NC) interrupts the circuit and de-energizes the contactor.

- **S3 - START Button (NO):** A normally open pushbutton that accomplishes the circuit and activates the contactor coil.

- **K1 Coil – Contactor Actuation (A1/A2):** When energized, the K1 Coil - Contactor Actuation (A1/A2) closes the primary contactor, providing power to the motor.

- **H1 – Indicator Lamp:** The H1 - Indicator Lamp provides visual input when the motor is running.

## Basic Operating Sequence

- To power up the circuit, close Q1 (power side) & Q2 (control side) simultaneously.

- To start the motor, press the START button (S3). The control voltage energizes the K1 coil, the main contactor closes, and the motor starts.

- To stop the motor, press the STOP button (S2) (or) Emergency Stop (S1). The control circuit opens, K1 de-energizes, and the motor stops.

- The indicator lamp H1 flashes when the motor is running, confirming its active condition.

## Why This Setup Is Ideal Safe?

- 24V DC control minimizes shock danger.

- Simple wiring allows for easy troubleshooting.

- Compliant with DOL starting logic used in automation panels around the world.

## Applications

1. Motorized conveyor belts,

2. HVAC blowers,

3. Water pump, and

4. Small industrial machinery.
