# How can I interface a PLC and SCADA?

**URL:** <https://forumautomation.com/t/how-can-i-interface-a-plc-and-scada/12273>\
**Category:** Field Instrumentation\
**Tags:** plc\
**Created:** [July 10, 2024, 8:34am UTC](https://forumautomation.com/t/how-can-i-interface-a-plc-and-scada/12273 "2024-07-10T08:34:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![TSRS](https://forumautomation.com/user_avatar/forumautomation.com/tsrs/32/8023_2.png) [@TSRS](https://forumautomation.com/u/TSRS)\
**Post date:** [July 10, 2024, 8:34am UTC](https://forumautomation.com/t/how-can-i-interface-a-plc-and-scada/12273/1 "2024-07-10T08:34:11Z")

</div>

How can I interface a PLC and SCADA?

 ![image](https://cdn.forumautomation.com/original/2X/c/c7cad0d06880e1554a745e812e186c3523fa3392.png)

---

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [July 11, 2024, 5:03pm UTC](https://forumautomation.com/t/how-can-i-interface-a-plc-and-scada/12273/2 "2024-07-11T17:03:40Z")

</div>

The following are the primary steps that need to be taken in order to successfully interface a **[Programmable Logic Controller (PLC)](https://forumelectrical.com/qsm_quiz/plc-mcq/)** and a **[Supervisory Control and Data Acquisition (SCADA)](https://forumelectrical.com/qsm_quiz/scada-mcq/)** system:

**Step-1:** Choosing an appropriate communication protocol, such as Modbus, Profibus, (or) Ethernet/IP, is highly recommended.

**Step-2:** The PLC and the SCADA system should be connected using the proper wires (for example, Ethernet or serial).

**Step-3:** In order to configure the PLC, you must first set up the connectivity parameters.

**Step-4:** In order to connect with the PLC, you will need to configure the SCADA software.

**Step-5:** PLC data points should be mapped to SCADA tags.

**Step-6:** To display and control the data from the PLC, you should design the SCADA interface.

**Step-7:** Perform a test of communication by confirming that the PLC and SCADA are exchanging data.

You can also follow us on **[AutomationForum.co](https://automationforum.co/)**, **[Facebook](https://www.facebook.com/instrumentation.control)** and **[Linkedin](https://www.linkedin.com/showcase/81532759/feed/posts/)** to receive daily Instrumentation updates.

You can also follow us on **[ForumElectrical.com](https://forumelectrical.com/)**, **[Facebook](https://www.facebook.com/profile.php?id=100091841583670)** and **[Linkedin](https://www.linkedin.com/showcase/91130242/feed/posts/)** to receive daily Electrical updates.
