# Honeywell XnX transmitter with mA sensor optima plus

**URL:** <https://forumautomation.com/t/honeywell-xnx-transmitter-with-ma-sensor-optima-plus/7315>\
**Category:** Field Instrumentation\
**Created:** [October 21, 2019, 8:15pm UTC](https://forumautomation.com/t/honeywell-xnx-transmitter-with-ma-sensor-optima-plus/7315 "2019-10-21T20:15:35Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![solo\_Ado](https://forumautomation.com/user_avatar/forumautomation.com/solo_ado/32/4250_2.png) [@solo\_Ado](https://forumautomation.com/u/solo_Ado)\
**Post date:** [October 21, 2019, 8:15pm UTC](https://forumautomation.com/t/honeywell-xnx-transmitter-with-ma-sensor-optima-plus/7315/1 "2019-10-21T20:15:35Z")

</div>

This detector is not behaving as it should . It is to detect methane gas . I discovered a 500ohms resistor connected to TB-1 {I-4(+MA) &I-5(-V)} . and I am getting an error with code F165 . And , the mode of connection is source mode . However , I noticed too that it doesn’t accept mA calibration . But , when the resistor was removed the error did not come up but it couldn’t pass the loop test done .
