# Honeywell ST3000 Pressure, STT350 Temperature and Magnew3000 Flow Transmitters

**URL:** <https://forumautomation.com/t/honeywell-st3000-pressure-stt350-temperature-and-magnew3000-flow-transmitters/362>\
**Category:** Field Instrumentation\
**Created:** [March 25, 2015, 6:09pm UTC](https://forumautomation.com/t/honeywell-st3000-pressure-stt350-temperature-and-magnew3000-flow-transmitters/362 "2015-03-25T18:09:02Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [March 25, 2015, 6:09pm UTC](https://forumautomation.com/t/honeywell-st3000-pressure-stt350-temperature-and-magnew3000-flow-transmitters/362/1 "2015-03-25T18:09:04Z")

</div>

Honeywell ST3000 Pressure, STT350 Temperature and Magnew3000 Flow Transmitters have a digital-to-analog design that produces a single low level, 0.4-1%, high frequency component between 109 Hz and 1.8 kHz.Â This zero-average signal is removed by analog instrumentation input card input filtering which is typically between 1Hz and 60Hz.
