# Help me press a button and keep it held

**URL:** <https://forumautomation.com/t/help-me-press-a-button-and-keep-it-held/1930>\
**Category:** Industrial Automation\
**Created:** [April 20, 2017, 1:17pm UTC](https://forumautomation.com/t/help-me-press-a-button-and-keep-it-held/1930 "2017-04-20T13:17:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![dan74uk](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/48db29/32.png) [@dan74uk](https://forumautomation.com/u/dan74uk)\
**Post date:** [April 20, 2017, 1:17pm UTC](https://forumautomation.com/t/help-me-press-a-button-and-keep-it-held/1930/1 "2017-04-20T13:17:54Z")

</div>

arm needed or solenoid to move forward three cm and keep a button pressed down until our command tells it to release

---

<div class="post-metadata">

**Author:** ![carl\_e](https://forumautomation.com/letter_avatar_proxy/v4/letter/c/94ad74/32.png) [@carl\_e](https://forumautomation.com/u/carl_e)\
**Post date:** [April 22, 2017, 12:37pm UTC](https://forumautomation.com/t/help-me-press-a-button-and-keep-it-held/1930/2 "2017-04-22T12:37:15Z")

</div>

The typical control method is to control whatever it is that the button activates.

If the button is mechanical, then the command signal drives a pneumatic or electric actuator or even a mechanical solenoid which in turn drives linkage to accomplish the same task as the button movement.

If the button is electrical, then the command signal drives the coil of a relay. The relay’s contacts take the place of the switch in the circuit.

If you really need a mechanical solenoid, you can Google vendors for solenoids, which are typically available from electronic component distributors.

---

<div class="post-metadata">

**Author:** ![dan74uk](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/48db29/32.png) [@dan74uk](https://forumautomation.com/u/dan74uk)\
**Post date:** [April 24, 2017, 10:27pm UTC](https://forumautomation.com/t/help-me-press-a-button-and-keep-it-held/1930/3 "2017-04-24T22:27:56Z")

</div>

thank you very much most kind ive found something that looks like it cud work from a car parts company

 ![](https://cdn.forumautomation.com/original/1X/4bcfbfa215429147dcbea4e7e4696ba2a374148d.PNG)

very kind of you
