# Guidelines for selecting Controller modes

**URL:** <https://forumautomation.com/t/guidelines-for-selecting-controller-modes/749>\
**Category:** Field Instrumentation\
**Created:** [February 1, 2016, 2:29am UTC](https://forumautomation.com/t/guidelines-for-selecting-controller-modes/749 "2016-02-01T02:29:50Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [February 1, 2016, 2:29am UTC](https://forumautomation.com/t/guidelines-for-selecting-controller-modes/749/1 "2016-02-01T02:29:50Z")

</div>

**Controller Mode selection**

**Flow Control loop**

Proportional - Always used Integrally - Usually used Derivative - Never used

**Level Control Loop**

Proportional - Always used Integrally - Usually used Derivative - Rarely used

**Temperature Control Loop**

Proportional - Always used Integrally - Usually used Derivative - Usually used

**Analytical**

Proportional - Always used Integrally - Usually used Derivative - Sometimes used

**Pressure Control Loop**

Proportional - Always used Integrally - Usually used Derivative - Sometimes used
