# Good day, Can I ask about the other applications of the On/Off Control in Control System, because I am not satisfied with the results in the Internet. I hope that somebody can help me about these. Thanks for the quick reply. God Bless

**URL:** <https://forumautomation.com/t/good-day-can-i-ask-about-the-other-applications-of-the-on-off-control-in-control-system-because-i-am-not-satisfied-with-the-results-in-the-internet-i-hope-that-somebody-can-help-me-about-these-thanks-for-the-quick-reply-god-bless/1216>\
**Category:** Industrial Automation\
**Created:** [August 2, 2016, 1:05am UTC](https://forumautomation.com/t/good-day-can-i-ask-about-the-other-applications-of-the-on-off-control-in-control-system-because-i-am-not-satisfied-with-the-results-in-the-internet-i-hope-that-somebody-can-help-me-about-these-thanks-for-the-quick-reply-god-bless/1216 "2016-08-02T01:05:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Joshuavince](https://forumautomation.com/letter_avatar_proxy/v4/letter/j/8e8cbc/32.png) [@Joshuavince](https://forumautomation.com/u/Joshuavince)\
**Post date:** [August 2, 2016, 1:05am UTC](https://forumautomation.com/t/good-day-can-i-ask-about-the-other-applications-of-the-on-off-control-in-control-system-because-i-am-not-satisfied-with-the-results-in-the-internet-i-hope-that-somebody-can-help-me-about-these-thanks-for-the-quick-reply-god-bless/1216/1 "2016-08-02T01:05:37Z")

</div>

Good day, Can I ask about the other applications of the On/Off Control in Control System, because I am not satisfied with the results in the Internet. I hope that somebody can help me about these. Thanks for the quick reply. God Bless.

---

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [August 2, 2016, 4:27am UTC](https://forumautomation.com/t/good-day-can-i-ask-about-the-other-applications-of-the-on-off-control-in-control-system-because-i-am-not-satisfied-with-the-results-in-the-internet-i-hope-that-somebody-can-help-me-about-these-thanks-for-the-quick-reply-god-bless/1216/2 "2016-08-02T04:27:25Z")

</div>

> [@ON/OFF control action - Principle](https://forumautomation.com/t/on-off-control-action-principle/419):
>
> The ON/OFF control (two-position ) controller operates only when the measurement crosses the set point. In on/off control ,a valve would have only two positions fully opened or fully closed .As a result the output measurement always cycles above and below the set point. Application of On/Off control ON-OFF control is best applied to a large capacitance process that has essentially no dead time . Eg : large tank or bath A system where dead time is short and rate of rise is slow can be handled…

---

<div class="post-metadata">

**Author:** ![carl\_e](https://forumautomation.com/letter_avatar_proxy/v4/letter/c/94ad74/32.png) [@carl\_e](https://forumautomation.com/u/carl_e)\
**Post date:** [August 13, 2016, 4:51pm UTC](https://forumautomation.com/t/good-day-can-i-ask-about-the-other-applications-of-the-on-off-control-in-control-system-because-i-am-not-satisfied-with-the-results-in-the-internet-i-hope-that-somebody-can-help-me-about-these-thanks-for-the-quick-reply-god-bless/1216/3 "2016-08-13T16:51:10Z")

</div>

On-off Control applications

1. Safety shut-down circuits

2. Heat Treat - annealing large loads

3. Refrigeration, air conditioning

4. residential and commercial HVAC

5. Water pressure holding tanks

6. Strainer blow down

7. Lighting

8. Pump-up/pump-down level control (between an upper and lower limit)

9. Fire pump control

10. pressure vessel control, vacuum chamber control
