# Flow factor and its derivation

**URL:** <https://forumautomation.com/t/flow-factor-and-its-derivation/75>\
**Category:** Flow Measurement\
**Created:** [October 2, 2014, 6:06pm UTC](https://forumautomation.com/t/flow-factor-and-its-derivation/75 "2014-10-02T18:06:58Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [October 2, 2014, 6:06pm UTC](https://forumautomation.com/t/flow-factor-and-its-derivation/75/1 "2014-10-02T18:06:58Z")

</div>

A ‘flow factor’ is to multiply the flow transmitter signal measured on a 0-10 square root or 0-100 linear scale to get the flow calculated by flow metering. This is used due to the standardization of the transmitters signals, to 20-100 kPa or 4-20mA. The following points are considered for flow calculation and in deriving the flow factor:

D = pipe diameter, Small d = orifice diameter Service = gas or liquid PI = operating pressure DP = Transmitter differential pressure T =operating temperature Small p= density or molecular weight Small v= viscosity
