# Fisher 846 Current to Pressure Controller

**URL:** <https://forumautomation.com/t/fisher-846-current-to-pressure-controller/5957>\
**Category:** Field Instrumentation\
**Created:** [February 19, 2019, 1:41pm UTC](https://forumautomation.com/t/fisher-846-current-to-pressure-controller/5957 "2019-02-19T13:41:06Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rjsaia73](https://forumautomation.com/letter_avatar_proxy/v4/letter/r/ccd318/32.png) [@rjsaia73](https://forumautomation.com/u/rjsaia73)\
**Post date:** [February 19, 2019, 1:41pm UTC](https://forumautomation.com/t/fisher-846-current-to-pressure-controller/5957/1 "2019-02-19T13:41:06Z")

</div>

I am currently using a Fisher 2500 Level controller in a contact tower. Independently I have a Rosemount 3051 DP Transmitter for level indication to the PLC. My Question??

Can I use the output of the Rosemount to power a Fisher 846 I to P to operate my control valve? Secondly, wiring the 846 from the 3051 would be parallel? Finally, will this disrupt the 4-20 mA output back to the PLC?
