# Explain Delta winding Phase-to-Line voltage conversion and vice versa?

**URL:** <https://forumautomation.com/t/explain-delta-winding-phase-to-line-voltage-conversion-and-vice-versa/12104>\
**Category:** Uncategorized\
**Created:** [May 28, 2024, 1:13am UTC](https://forumautomation.com/t/explain-delta-winding-phase-to-line-voltage-conversion-and-vice-versa/12104 "2024-05-28T01:13:05Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [May 28, 2024, 1:13am UTC](https://forumautomation.com/t/explain-delta-winding-phase-to-line-voltage-conversion-and-vice-versa/12104/1 "2024-05-28T01:13:06Z")

</div>

## Delta Winding Configuration

In a **[delta (Δ)](https://forumelectrical.com/how-to-connect-a-3-phase-motor-in-star-and-delta/)** configuration, every phase **[winding](https://forumelectrical.com/tertiary-winding-in-transformers/)** is connected in a loop, with line conductors connecting at the junctions between windings. This means that the line voltage is measured over the entire winding, whereas the phase voltage is measured for each individual **[winding.](https://forumelectrical.com/transformer-testing-procedure/)**

 ![7](https://cdn.forumautomation.com/original/2X/f/f5ba0fff71212cc7bfd05b987ea5a91f3c2837cd.jpeg)

In a delta-connected winding, the windings are arranged in a triangle pattern, with one end of each winding connected to one end of the other two.

## Key Parameters

- Line Voltage (V\_L) is the voltage measured across any 2 line conductors.
- **[Phase](https://forumelectrical.com/how-to-find-3-phase-neutral-current/)** Voltage (V\_Ph) is the voltage determined across a single delta winding.

## Converting Phase Voltage to Line Voltage

To convert phase voltage (Vph) to line voltage (Vline) in a delta connection, use the formula

**Vline = √3 × Vph**

This is because the line voltage is the phasor sum of the voltages across two series-connected phases.

## Converting Line Voltage to Phase Voltage

To convert line voltage (Vline) to phase voltage (Vph) in a delta connection, use:

**Vph = Vline / √3**

In a delta connection, the line voltage is divided by √3 and applied to each phase winding.

## Practical Example

Assume the delta-connected system has a phase voltage (Vph) of 230V.

To determine the line voltage (Vline), we use:

Vline = √3 x Vph

Vline = √3 x 230V

Vline = 398.4V

To calculate the phase voltage, use the formula Vph = Vline / √3. For example, if the line voltage is 400V, the phase voltage would be 230.9V.

To convert phase & line voltages in a delta connection, multiply the phase voltage by √3, or divide the line voltage by √3.
