# Disadvantages of Star Delta Converter

**URL:** <https://forumautomation.com/t/disadvantages-of-star-delta-converter/832>\
**Category:** Electrical\
**Created:** [March 7, 2016, 12:56am UTC](https://forumautomation.com/t/disadvantages-of-star-delta-converter/832 "2016-03-07T00:56:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [March 7, 2016, 12:56am UTC](https://forumautomation.com/t/disadvantages-of-star-delta-converter/832/1 "2016-03-07T00:56:25Z")

</div>

1.Low starting torque,only 33% starting torque

2.Break in supply - Possible transients

3.Six terminal motor requires

4.The delta of motor is transformed in starter and not on motor terminals

5.Applications with a load torque higher than 50% of the motor rated torque will not be able to start using the star-delta starter

6.Low Starting Torque - Reduction of the line voltage by a factor of 57.7% to the motor and the current is reduced to 1/3 of the current at the full voltage,but the starting torque is also reduced 1/3 to 1/5 of DOL starting torque.
