# Direct action and Reverse action on a controller

**URL:** <https://forumautomation.com/t/direct-action-and-reverse-action-on-a-controller/97>\
**Category:** Industrial Automation\
**Created:** [October 3, 2014, 12:42pm UTC](https://forumautomation.com/t/direct-action-and-reverse-action-on-a-controller/97 "2014-10-03T12:42:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [October 3, 2014, 12:42pm UTC](https://forumautomation.com/t/direct-action-and-reverse-action-on-a-controller/97/1 "2014-10-03T12:42:46Z")

</div>

Direct action : In a direct acting controller, the output increases when the process measurement (variable) increases.

Reverse action : In a reverse action controller, the output decreases when the process measurement (variable) increases.

---

<div class="post-metadata">

**Author:** ![alekhyaochre](https://forumautomation.com/letter_avatar_proxy/v4/letter/a/e56c9b/32.png) [@alekhyaochre](https://forumautomation.com/u/alekhyaochre)\
**Post date:** [November 1, 2014, 4:58am UTC](https://forumautomation.com/t/direct-action-and-reverse-action-on-a-controller/97/2 "2014-11-01T04:58:34Z")

</div>

Direct Action means that the controller output rises if the measurement increases. Reverse Action means that the controller output drops when the measurement rises.
