# Different Types of Relays & their Protection

**URL:** <https://forumautomation.com/t/different-types-of-relays-their-protection/13967>\
**Category:** Electrical\
**Tags:** relay\
**Created:** [March 25, 2026, 7:11am UTC](https://forumautomation.com/t/different-types-of-relays-their-protection/13967 "2026-03-25T07:11:10Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [March 25, 2026, 7:11am UTC](https://forumautomation.com/t/different-types-of-relays-their-protection/13967/1 "2026-03-25T07:11:11Z")

</div>

The different types of [**relays**](https://forumelectrical.com/relay-protection-settings-psm-tsm-el-ol-mf/) & their protection are:

 ![1](https://cdn.forumautomation.com/original/2X/a/ae8826991bcfce93135c359adb5bab1c216907b7.jpeg)

1. **Overcurrent Relay (OCR)** – It operates when current exceeds a preset value due to overload or fault.

2. **Earth Fault Relay (EFR)** – It detects leakage current flowing to earth and trips the circuit.

3. **Differential Relay** – It compares currents at two points and operates when there is a difference indicating an internal fault.

4. **Over Voltage Relay** – It trips the system when voltage rises above the safe limit.

5. **Under Voltage Relay** – It operates when voltage drops below a preset level.

6. **Thermal Overload Relay** – It protects equipment from overheating due to prolonged overload.

7. **Distance Relay** – It detects faults based on impedance or distance from the relay location.

8. **Buchholz Relay** – It protects transformers by detecting internal faults through gas accumulation.

9. **Reverse Power Relay** – It operates when power flows in the reverse direction, protecting generators.

10. **Negative Phase Sequence Relay** – It detects phase imbalance that causes heating in rotating machines.

11. **Frequency Relay** – It operates when system frequency deviates from normal limits.

12. **[Restricted Earth Fault Relay (REF)](https://forumelectrical.com/restricted-earth-fault-ref-relay-working-principle-diagram-transformer-protection-guide/)** – It provides sensitive protection for internal earth faults within a defined zone.

13. **Over Flux Relay** – It protects transformers from overfluxing due to high V/Hz ratio.

14. **Directional Overcurrent Relay** – It operates only when fault current flows in a specific direction.

15. **Time Delay Relay** – It introduces a preset delay before tripping to ensure coordination.

16. **Instantaneous Relay** – It trips immediately when fault current exceeds a set value.

17. **Voltage Balance Relay** – It detects voltage imbalance between phases.

18. **[Phase Failure Relay](https://forumelectrical.com/phase-failure-relay-voltage-monitoring-relay-complete-guide-for-three-phase-motor-protection/)** – It operates when one or more phases are lost (single phasing).

19. **Lockout Relay** – It acts as a master relay to trip and lock the system during major faults.

20. **Auxiliary Relay** – It supports control and interlocking functions in protection circuits.

21. **Current Balance Relay** – It detects imbalance in current between phases.

22. **Under Frequency Relay** – It operates when system frequency falls below the set value.

23. **Over Frequency Relay** – It trips when system frequency exceeds the safe limit.

24. **Pilot Relay** – It uses communication signals for protection between two ends of a line.

25. **Gas Relay** – It detects gas formation in transformer oil indicating internal faults.

26. **Out of Step Relay** – It protects generators from instability due to loss of synchronism.

27. **Sync Check Relay** – It ensures proper synchronization before connecting two systems.

28. **Vector Surge Relay** – It detects sudden changes in phase angle indicating faults or disturbances.

29. **Trip Circuit Supervision Relay** – It monitors the health of the trip circuit continuously.

30. **Auto Reclose Relay** – It automatically recloses a circuit breaker after a temporary fault.

31. **Thermal Relay** – It protects equipment from temperature rise due to overload.

32. **Rate of Rise Relay** – It operates when current increases rapidly, indicating a fault.

33. **Directional Earth Fault Relay** – It detects the direction of earth fault current.

34. **Power Factor Relay** – It operates when power factor falls below a preset value.

35. **Voltage Restraint Relay** – It modifies relay operation based on voltage conditions.

36. **Voltage Controlled Relay** – It operates depending on voltage magnitude in addition to current.

37. **Current Differential Relay** – It compares incoming and outgoing currents to detect internal faults.

38. **Transformer Protection Relay** – It provides comprehensive protection for transformers against multiple faults.

39. **Generator Protection Relay** – It protects generators from electrical and mechanical faults.

40. **Motor Protection Relay** – It safeguards motors against overload, faults, and abnormal conditions.

41. **Busbar Differential Relay** – It detects faults within the busbar zone by comparing currents.

42. **Arc Flash Relay** – It detects arc faults using light and current sensing.

43. **Phase Sequence Relay** – It ensures correct phase sequence to prevent reverse rotation.

44. **Dead Line Relay** – It detects absence of voltage in a transmission line.

45. **Field Failure Relay** – It operates when excitation in a generator is lost.

46. **Under Current Relay** – It detects abnormally low current conditions.

47. **Sensitive Earth Fault Relay** – It detects very small leakage currents to earth.

48. **Over Temperature Relay** – It trips when temperature exceeds safe limits.

49. **Winding Temperature Relay** – It monitors transformer winding temperature to prevent damage.

50. **Oil Level Relay** – It operates when transformer oil level falls below the required level.
