# Difference between Synchronous and Induction motor

**URL:** <https://forumautomation.com/t/difference-between-synchronous-and-induction-motor/834>\
**Category:** Electrical\
**Created:** [March 7, 2016, 1:07am UTC](https://forumautomation.com/t/difference-between-synchronous-and-induction-motor/834 "2016-03-07T01:07:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [March 7, 2016, 1:07am UTC](https://forumautomation.com/t/difference-between-synchronous-and-induction-motor/834/1 "2016-03-07T01:07:26Z")

</div>

Comparison of Synchronous and Induction Motor

**Synchronous Motor**

Speed of Operation - For a given frequency,the speed of synchronous motor is constant irrespective of the load

Power factor based operation - Synchronous motor can be operated over a wide range of power factor,both lagging and leading

Starting requirement - Not a self starting motor

Excitation requirement - A D C excitation is required for the rotor

Cost,Simplicity and Efficiency - Costly and complex motor construction.Highly efficient for low speed drives r.p.m below 300,as their power factor can always be adjusted to 1.0

---

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [March 7, 2016, 1:11am UTC](https://forumautomation.com/t/difference-between-synchronous-and-induction-motor/834/2 "2016-03-07T01:11:21Z")

</div>

**Induction Motors**

Speed of Operation - For a given frequency,the speed of induction motors falls with increase in load

Power factor based operation - Induction motors run always with a lagging power factor,which may be low at light loads.

Starting requirement - Self-Starting motor

Excitation requirement - No excitation is required for the rotor

Cost,Simplicity and Efficiency - Higher efficiency for speed above 600 r.p.m.Simple in construction and cheaper in price
