# Difference Between Stub and Teed Protection

**URL:** <https://forumautomation.com/t/difference-between-stub-and-teed-protection/12425>\
**Category:** Electrical\
**Tags:** protection\
**Created:** [August 9, 2024, 2:20pm UTC](https://forumautomation.com/t/difference-between-stub-and-teed-protection/12425 "2024-08-09T14:20:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [August 9, 2024, 2:20pm UTC](https://forumautomation.com/t/difference-between-stub-and-teed-protection/12425/1 "2024-08-09T14:20:41Z")

</div>

The following table summarize the differences between **[Stub Protection](https://forumautomation.com/t/what-is-stub-protection-in-transmission-system-and-switchyard-area/12348/2)** & Teed Protection

 ![image](https://cdn.forumautomation.com/original/2X/f/f6156de60cb79514504eeca14f507c679dcf99ec.jpeg)

| Parameters | Stub Protection | Teed Protection |
| --- | --- | --- |
| System Configuration | Applied in a 3-terminal system in which one terminal is momentarily unavailable or disconnected. | Applied in a 3-terminal system with all terminals constantly active and coupled. |
| Protection Scope | When one of the active terminals fails, the focus is on protecting the remaining two. | Concurrently protects all three interconnected terminals. |
| Application | Typically used for maintenance, testing, or terminal isolation. | Used in systems with three terminals that are continually connected to form a T or Y arrangement. |
| Complexity | Generally simple due to the transitory nature & fewer active terminals. | More complicated due to the requirement to protect all active terminals & their interconnections. |
| Use Case | Temporary protection under certain conditions (such as maintenance). | Permanent protection for a system with 3 active & interconnected terminals. |
| Fault Detection | Detects faults between two active terminals. | Detects problems in all three terminals & their interconnections. |
| Relay Settings | When the system resumes normal operation, tweaks or changes are required. | Settings are intended to support the ongoing operation of all terminals. |
| Relay Coordination | Fewer terminals are active, which simplifies coordination. | It takes more complex coordination to enable reliable fault detection among 3 terminals. |
| Example | A two-ended connection that is temporarily protected as a stub if the third termination is disconnected. | A three-terminal line with all terminals operational and protection required throughout the system. |

This table clearly compares Stub with Teed Protection in a wide range of aspects.

You can also follow us on **[AutomationForum.co](https://automationforum.co/)**, **[Facebook](https://www.facebook.com/instrumentation.control)** and **[Linkedin](https://www.linkedin.com/showcase/81532759/feed/posts/)** to receive daily Instrumentation updates.

You can also follow us on **[ForumElectrical.com](https://forumelectrical.com/)**, **[Facebook](https://www.facebook.com/profile.php?id=100091841583670)** and **[Linkedin](https://www.linkedin.com/showcase/91130242/feed/posts/)** to receive daily Electrical updates.
