# Difference between CT and PT

**URL:** <https://forumautomation.com/t/difference-between-ct-and-pt/13098>\
**Category:** Electrical\
**Tags:** transformer\
**Created:** [March 19, 2025, 12:18pm UTC](https://forumautomation.com/t/difference-between-ct-and-pt/13098 "2025-03-19T12:18:38Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabert](https://forumautomation.com/user_avatar/forumautomation.com/rabert/32/6784_2.png) [@Rabert](https://forumautomation.com/u/Rabert)\
**Post date:** [March 19, 2025, 12:18pm UTC](https://forumautomation.com/t/difference-between-ct-and-pt/13098/1 "2025-03-19T12:18:38Z")

</div>

> ## Difference between CT and PT

> ## CT vs PT

| Current Transformers (CT) | Potential Transformer (PT) |
| --- | --- |
| Reduce the main power line current to be measured by normal range instruments i.e. current is stepped down from ptimary to secondary | Reduce the main power line voltage to be measured by normal range of instrument. i.e., voltage is stepped down from primary to secondary |
| Primary winding of CT is connected in series with the main power line to sense current | Primary winding of PT is connected across the main power line to sense current |
| Primary winding has less number of turns as compared to the secondary winding | Primary winding has more number of turns as compared to the secondary winding |
| CT secondary side should never be open circuited while energized, to restrict accidental over-voltage | PT secondary can be safely open circuited even if the PT energized, since secondary voltage is always restricted by the turn ratio |
| In many cases, such as in bar type, in single primary winding type and in clamp-on type CT, the primary winding is nothing but main power line conductor itself | In all the PTs, separate primary as well as secondary windings are necessary. Primary winding terminals are connected across the main power line |
| While using CT for measurement of power, secondary winding is connected in series with the coil of wattmeter | While using PT for measurement of power, secondary winding is connected in parallel with the coil of wattmeter |

 ![1](https://cdn.forumautomation.com/original/2X/0/0b82dea15ed34dc9658c12bb2e1b8b4a6e5eb0a6.jpeg)
