# Could a 1200 baud rate (equivalent to a signal change every 0.833 milliseconds) cause issues with an RPI of 5 ms for HART communication?

**URL:** <https://forumautomation.com/t/could-a-1200-baud-rate-equivalent-to-a-signal-change-every-0-833-milliseconds-cause-issues-with-an-rpi-of-5-ms-for-hart-communication/12134>\
**Category:** Industrial Networking\
**Tags:** interviewquestions\
**Created:** [June 4, 2024, 6:23am UTC](https://forumautomation.com/t/could-a-1200-baud-rate-equivalent-to-a-signal-change-every-0-833-milliseconds-cause-issues-with-an-rpi-of-5-ms-for-hart-communication/12134 "2024-06-04T06:23:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sundar\_Iyalunaidu](https://forumautomation.com/user_avatar/forumautomation.com/sundar_iyalunaidu/32/7404_2.png) [@Sundar\_Iyalunaidu](https://forumautomation.com/u/Sundar_Iyalunaidu)\
**Post date:** [June 4, 2024, 6:23am UTC](https://forumautomation.com/t/could-a-1200-baud-rate-equivalent-to-a-signal-change-every-0-833-milliseconds-cause-issues-with-an-rpi-of-5-ms-for-hart-communication/12134/1 "2024-06-04T06:23:10Z")

</div>

Could a 1200 baud rate (equivalent to a signal change every 0.833 milliseconds) cause issues with an RPI of 5 ms for HART communication?

 ![image](https://cdn.forumautomation.com/original/2X/c/cb914e38d7c8d5bedb35dbc230bdfc2a7348777b.jpeg)

---

<div class="post-metadata">

**Author:** ![Instrument\_Engineer](https://forumautomation.com/user_avatar/forumautomation.com/instrument_engineer/32/6734_2.png) [@Instrument\_Engineer](https://forumautomation.com/u/Instrument_Engineer)\
**Post date:** [June 12, 2024, 6:26pm UTC](https://forumautomation.com/t/could-a-1200-baud-rate-equivalent-to-a-signal-change-every-0-833-milliseconds-cause-issues-with-an-rpi-of-5-ms-for-hart-communication/12134/2 "2024-06-12T18:26:55Z")

</div>

The main consideration is whether the baud rate and RPI are compatible for reliable communication. The HART protocol typically operates at 1200 baud and is designed to handle the timing requirements of industrial communication.

In practice, a 1200 baud rate should not cause issues with an RPI of 5 ms for HART communication. The protocol is designed to operate effectively within these parameters. The critical factor is that HART messages are typically structured to ensure that data is transmitted and received reliably within the constraints of the baud rate and timing intervals.

Thus, under normal circumstances, a 1200 baud rate with a 5 ms RPI should not create any significant problems for HART communication.
