# Config Mismatch error when loading an HG(Highway Gateway) point

**URL:** <https://forumautomation.com/t/config-mismatch-error-when-loading-an-hg-highway-gateway-point/229>\
**Category:** Honeywell\
**Created:** [January 5, 2015, 6:28pm UTC](https://forumautomation.com/t/config-mismatch-error-when-loading-an-hg-highway-gateway-point/229 "2015-01-05T18:28:11Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [January 5, 2015, 6:28pm UTC](https://forumautomation.com/t/config-mismatch-error-when-loading-an-hg-highway-gateway-point/229/1 "2015-01-05T18:28:11Z")

</div>

This error usually indicates that the point being loaded does not match the configuration that is required for it.

As an example, loading a DO point as a LATCHED point type, but the box/slot configuration for the slot is PULSED will give a configuration mismatch error. Make sure that you are loading the correct configuration to the slot.
