# Comparison of different motor starting techniques

**URL:** <https://forumautomation.com/t/comparison-of-different-motor-starting-techniques/1695>\
**Category:** Electrical\
**Created:** [January 23, 2017, 1:18am UTC](https://forumautomation.com/t/comparison-of-different-motor-starting-techniques/1695 "2017-01-23T01:18:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![denizen](https://forumautomation.com/letter_avatar_proxy/v4/letter/d/848f3c/32.png) [@denizen](https://forumautomation.com/u/denizen)\
**Post date:** [January 23, 2017, 1:18am UTC](https://forumautomation.com/t/comparison-of-different-motor-starting-techniques/1695/1 "2017-01-23T01:18:32Z")

</div>

**RVSS (Reduced Voltage Soft Start)**

Advantages - Potentially low cost Soft Mechanical start

Disadvantages- May not be able to meet starting torque requirements. May not meet interconnect requirement Produce Harmonic

**VFD Start**

Advantages- Provides near rated torque at starting Soft mechanical start Meets utility voltage sag/inrush limits

Disadvantages- High installed cost Produce harmonics Complexity of equipment May require cooling equipment Synch transfer controls Requires M+1 additional motor starter

**Capacitor Assisted Motor Start**

Advantages- Provides near rated torque at starting Meets interconnect requirement Lower cost Simplest to install and maintain

Disadvantage- Does not provide a soft start function for mechanical loads that require it.

 ![](https://cdn.forumautomation.com/original/1X/eeecf64178c1698e403d781a6c2ee9f386071be1.jpg)
