# Cold junction compensation

**URL:** <https://forumautomation.com/t/cold-junction-compensation/88>\
**Category:** Temperature Measurement\
**Created:** [October 2, 2014, 6:26pm UTC](https://forumautomation.com/t/cold-junction-compensation/88 "2014-10-02T18:26:02Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![instrumen](https://forumautomation.com/letter_avatar_proxy/v4/letter/i/65b543/32.png) [@instrumen](https://forumautomation.com/u/instrumen)\
**Post date:** [October 2, 2014, 6:26pm UTC](https://forumautomation.com/t/cold-junction-compensation/88/1 "2014-10-02T18:26:02Z")

</div>

‘Cold Junction Compensation’ is used in temperature measurement by means of a thermocouple. This compensation is to correct the error caused by the room (ambient) temperature. The mv produced by a thermocouple is proportional to the temperature difference between its ‘hot’ and ‘ Cold’ junction. The cold junction is the ambient temperature (control room). Without ‘cold junction compensation’ the temperature at the hot junction will measure inaccurately.
